UV Curing Paints
UVIPRIME # 4000
UVIPRIME # 4000 is a UV pigmented radiation curable basecoat based on modified acrylic resin and reactive monomer. It provides fast curing; good sandability, excellent adhesion and high build film coat. It has a very good chemical and mechanical property.
It is best recommended to be used as basecoat for high quality wooden furniture, plywood, flooring panels, etc.
Appearance: White
Density: 1.2 ± 0.3 kg/liter
Viscosity: 90 – 100 sec.
Solid content: 63.0 ± 1.0 %
Coverage: 100 – 120 gms/m2
Flash-off time: 5 – 7 min.
Process: TL03 + TL05 (low pressure)
Curing: 1 lamp Hg + 1 lamp Ga
Belt Speed: 6 – 7 m/min., Distance (15 cm-lamp)
Application condition: Air temperature 5ºC min, Relative humidity 85% max
Pot life: 10 days (at least)
Application method: Spray
Sandability: After UV oven
Thinner ratio: Thinner # 445 (20-30%)
Density: 1.2 ± 0.3 kg/liter
Viscosity: 90 – 100 sec.
Solid content: 63.0 ± 1.0 %
Coverage: 100 – 120 gms/m2
Flash-off time: 5 – 7 min.
Process: TL03 + TL05 (low pressure)
Curing: 1 lamp Hg + 1 lamp Ga
Belt Speed: 6 – 7 m/min., Distance (15 cm-lamp)
Application condition: Air temperature 5ºC min, Relative humidity 85% max
Pot life: 10 days (at least)
Application method: Spray
Sandability: After UV oven
Thinner ratio: Thinner # 445 (20-30%)
- Substrate should be free from contaminant such as oil and dust, etc.
- Moisture content of timber should be kept below 15 percent.
- UVIPRIME # 4000 has to be cured by two(2) lamps (Ga + Hg).
UVIPRIME # 4000 contains no solvents, nevertheless use protective gloves and eye goggles when handling this product. It is recommended to provide proper ventilation on working area. If contact with skin or splash in eyes, wash with fresh water and seek medical advise.
Store in the dark, cool and dry places under normal temperature and humidity. Shelf life of 3- 4 months at 300C room temperature.
