uv curing paints
UVISEAL #1200 HV
UVISEAL #1200 HV is a mono-component UV radiation curable sanding sealer based on epoxy-acrylic aromative oligomer and reactive monomer. It provides fast curing; good sanding ability, excellent adhesion and high build film coat. It has very good chemical and mechanical property.
It is best recommended to be used as basecoat for high quality furniture, plywood, flooring panels, flat panels and solid woods, etc.
Appearance – Transparent
Specific Gravity (25ºC) – 1.20 +/- 0.03 kg/L
Viscosity (20ºC) – 50 +/- 5 poise
Solid Content – 99% +/- 1
Flash Point – >60ºC
Coating Rate – 40 – 50 gm/m2
Curing Speed – 6 – 8 m/min.
Full Cross-linking – 2 Hg Lamps
Irradiation Distance – 15 cm
Power Lamp – 80 – 120 watts
Application Condition – Air Temperature 5º min – Relative Humidity 85% max
Application Method – Reverse Roller
Dilution – Not required
VOC – Not recommended
- Substrate should be free from contaminant such as oil and dust etc.
- The moisture content of timber should be kept below 15%.
- If the surface is to be treated with stain, ensure that the light fastness is stable to avoid any patches of colour.
- Pot life is 6 months if kept in a shaded area with monitored temperature in a tightly closed container.
