Thinner
U.V. THINNER #405
U.V. THINNER #405 is a mixture of esters suitable diluents to UV products. It is manufactured for reducing lacquers before they are applied by different methods.
Keep the container tightly closed. Shelf life is unlimited in close container. Keep away from direct sunlight and other sources of heat or ignition; do not smoke in storage areas.
U.V. THINNER contains highly flammable solvent. Harmful if inhaled and if absorbed through skin can cause irritation. Always use protective gloves and eye goggles when handling this product. It is highly recommended to provide proper ventilation on working area. Keep out of reach of children. If contact with skin or splash in eyes, wash with fresh water for a couple of minutes while removing contaminated clothing and shoes. If affected by inhalation of vapour, remove to fresh air. If swallowed, call a physician immediately. Do not induce vomiting.
• Quickly reduces the consistency of the lacquer to required degree.
• Improves film smoothness of lacquers when applied either by spray, curtain coating and roller coating thus extending excellent finish.
• Lacquer dries without blushing, resin blush, pin holding and other surface defects.
• No “orange peel” developed after the evaporation of UV THINNER, and therefore increases the tensile strength of the film along with its gloss.
• Improves film smoothness of lacquers when applied either by spray, curtain coating and roller coating thus extending excellent finish.
• Lacquer dries without blushing, resin blush, pin holding and other surface defects.
• No “orange peel” developed after the evaporation of UV THINNER, and therefore increases the tensile strength of the film along with its gloss.
Appearance – Clear
Specific Gravity – ASTM D 3505 – 0.88 +/-.02Kg/L
Colour (Pt-Co Scale) – ASTM D 1209 – 10
Initial Boiling Point – ASTM D – 70 – 90
Copper Corrosion – ASTM D 849 – none
Flash Points – IP 170 – 10°C
UV THINNER has an average evaporation rate suggested for all UV products when application is made in normal condition of temperature and humidity. UV THINNER has a certain preventing milky effect of the surface.
