Thinners
P.U. THINNER #205 / LVe
P.U. THINNER #205 LV is a slow drying thinner not interfering with urethane reaction performed by a wide range of evaporation. It is recommended to use in summer season when the temperature in the working place exceeds the room temperature.
Usg, 18L (Pail) and 200L (Drum)
Keep the container tightly closed. Shelf life is unlimited in close container. Keep away from direct sunlight and other sources of heat or ignition; do not smoke in storage areas.
P.U. THINNER #205 contains flammable solvents. Always use protective gloves and eye goggles when handling this product. It is highly recommended to provide proper ventilation on working area. If contact with skin or splash in eyes, wash with fresh water and seek medical advice.
• Quickly reduces the consistency of the lacquer to the required degree.
• Improves film smoothness of lacquers when applied either by spray or dipping thus extending excellent finish.
• Lacquer dries without blushing, resin blush, pin-holding and other surface defects.
• No “orange peel” developed after the evaporation of P.U. Thinner and therefore, increases the tensile strength of the film along with its gloss.
• Improves film smoothness of lacquers when applied either by spray or dipping thus extending excellent finish.
• Lacquer dries without blushing, resin blush, pin-holding and other surface defects.
• No “orange peel” developed after the evaporation of P.U. Thinner and therefore, increases the tensile strength of the film along with its gloss.
Appearance – Visual – Clear
Specific Gravity – ASTM D 1475 – 0.86 Kg/L
Colour (Say bolt) – ASTM D 1209 – +30
Boiling Point – ASTM D 850 – 1000C
Copper Corrosion – ASTM D 849 – none
Acidity – ASTM D 1613 – < 0.03%
Non-aromatics – 40%
Flash Points – IP 170 – 180C
P.U. Thinner #205 LV is a mixture of aromatic hydrocarbon and VOC exempt ester solvents. It is recommended for polyurethane varnishes for low VOC conformity.
