N.C. Thinner #115

Keep the container tightly closed. Shelf life is unlimited in close container. Keep away from direct sunlight and other sources of heat or ignition; do not smoke in storage areas.

N.C. THINNER 115 contains highly flammable solvents. Harmful if inhaled and if absorbed through skin can cause irritation. Always use protective gloves and eye goggles when handling this product. It is highly recommended to provide proper ventilation on working area. Keep out of reach of children. If contact with skin or splash eyes, wash with fresh water for a couple of minutes while removing contaminated clothing and shoes. If affected by inhalation of vapour, remove to fresh air. If swallowed, call a physician immediately. Do not induce vomiting.

• Quickly reduces the consistency of the lacquer to the required degree.
• Improves film smoothness of lacquers when applied either by spray or dipping thus extending excellent finish.
• Lacquer dries without blushing, resin blush, pin holing and other surface defects.
• No “orange peel” developed after the evaporation of N.C. Thinner, and therefore increases the tensile strength of the film along with its gloss.

Appearance – Visual – Clear

Specific Weight – ASTM D 1475 – 0.85 Kg/L

Colour (Say bolt) – ASTM D 1209 – +30

Boiling Point – ASTM D 850 – 56°C

Acidity – ASTM D 1316 – < 0.03%

Non-aromatics – 40%

Flash Points – IP 170 – 10°C

N.C. THINNER 115 has an average evaporation rate suggested for all Nitro Products when application is made in normal condition of temperature and humidity.
N.C. THINNER 115 has a certain action preventing milky effect of the surface.