self drying alkyd based paints

hi-gloss enamel

HI-GLOSS ENAMEL is a finished based on synthetic resin used as a gloss finish in alkyd system.

For interior and exterior surfaces like masonry, steel, wood, asbestos etc.

Weather resistance and exterior protection

Good colour retention

Ease of application

Excellent hiding power and adhesion

Super glossy finish

Colours – As per RAL colour card

Flash Point – 390C

Solid Content – Approx. 50% by volume

Dft. – 35 microns per coat


Touch Dry – After 4 hrs.

Over Coating – Minute 16 hrs.

Shelf Life – One (1) year

Substrate must be free from oil and other contaminants.
Sandblasting is required to Sa 2 ½, if sandblasting is not possible, manual wire brushing is recommended. Use Deruster to remove away rust and rinse with water and let it dry. Apply 1 -2 coats of red oxide primer by roller, brush or spray or 1 – 2 coats of under coat prior to the application of HI-GLOSS ENAMEL.