exterior wood varnish
EXTERIOR WOOD VARNISH is a varnish based on modified alkyd resin developed to protect and decorate wooden surfaces subjected for extreme conditions. It has a good colour retention, weather resistance, easy to apply and durable finish. It has special additive to protect the wood against fungus, moulds and other insects.
Ideal for all types of woods, hardwoods, joinery, clipboards. It can also be used on untreated wood and previously treated woods.
Colour – Clear and Tinted
Gloss – Matt/Semi-gloss/Gloss
Specific gravity – 0.900
Flash Point – 400C
Volume solids – 35 approx.
DFT – 30 microns
Coverage – 10 – 12 m2/L
VOC – 500 g/L
Method of Application – Brush, Spray
Mixing Ratio – Single pack
Surface must be clean, dry, and free from dirt, oil, grease and other foreign matters. If detergent is used for cleaning, rinse with fresh water.
The temperature of the substrate should be min 50C, above the dew point. Avoid painting on direct sunlight.
The temperature of the substrate should be min 50C, above the dew point. Avoid painting on direct sunlight.
Dry touch @ 250C – 5 hours
Hard dry @ 250C – 10 hours
Recoating time @ 250C – 16 hours
