Home » Polyurethane paints » PU Parquet Topcoat
Pail-Mas-Paints

Polyurethane paints

PU Parquet Topcoat

PU PARQUET TOPCOAT is a polyurethane lacquer, particularly formulated for varnishing parquet, offering a very high flexibility and an outstanding resistance to abrasion.
download datasheet
Keep away from heat and fire. Store in the dark, cool and dry place. Shelf life up to 12 months in closed container.
PU PARQUET TOPCOAT does not contain dangerous solvents; nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. PU PARQUET TOPCOAT is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.
PU PARQUET TOPCOAT is highly recommended to varnish wooden floors and parquet to protect the same with abrasion and trampling.

Appearance – Transparent Liquid

Product Code – 1000 – 1002 – 1004

Specific Gravity – 0.930 – 0.970 – 0.970

Gloss – Gloss – Satin – Matt

Viscosity (25°C, FC #4) – 26” – 26” – 26”

Flash Point (°C) – 20 – 20 – 20

Catalyst – 050 – 055 – 055

Non-Volatile (Wt.%) – 37 – 39 – 40

Application Condition:

  • Air Temperature – 5 -35°C
  • Relative Humidity – 85% max.

Application Method – Brush, Spray, Roller

Thinner – PU Thinner #105/ 205

Mixing Ratio (% Vol.). (Visc.= 13-15” FC # 4) – Base 100 – Cat. 100 – Thinner 25-30

Pot Life (25°C) – 3 – 4 hrs.

 

Drying Time (25°C)

  • Dust Free – 20 – 25 mins.
  • To Touch – 30 – 45 mins.
  • To Recoat – 2 – 3 hrs.
  • Hard Dry – 24 – 36 hrs.

Coating Rate – 6 – 8 m²/L

Recoating – Out coat may be sufficient for ordinary finish; however, one additional coat can be applied wet on wet if necessary. Light sanding with 400-600 grit sand paper is recommended before subsequent coat when recoating time exceeds 3 hrs.

brush-product