Polyurethane paints

PU Parquet EXT

PU PARQUET EXT is a polyurethane lacquer, particularly formulated for varnishing wood parquet, offering a very good flexibility and an outstanding resistance to abrasion for interior and exterior.

Keep away from heat and fire. Store in the dark, cool and dry place. Shelf life up to 12 months in closed container.
PU PARQUET EXT does not contain dangerous solvents; nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. PU PARQUET EXT is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.
PU PARQUET EXT is highly recommended to varnish wooden floors and parquet to protect the same with abrasion and trampling.

Appearance – Transparent Liquid

Product Code – 2000 – 2002 – 2004

Specific Gravity (25°) – 0.93 – 0.97 – 0.97

Gloss – Gloss – Satin – Matt

Viscosity (25°C, FC #4) – 26” – 26” – 26”

Flash Point (°C) – 20 – 20 – 20

Non-Volatile (Wt.%) – 38 – 40 – 42

Catalyst – 016

Application Condition:

  • Air Temperature – 5 -35°C
  • Relative Humidity – 85% max.

Application Method – Brush, Spray, Roller

Thinner – PU Thinner #105/ 205

Mixing Ratio (% by Vol.) – Base 100 Cat. – 100 Thinner – 20-25

Pot Life – 3 – 4 hrs.

Drying Time (25°C)

  • Dust Free – 30 – 35 mins.
  • To Touch – 45 – 60 mins.
  • To Recoat – 2 – 3 hrs.
  • Hard Dry – 24 – 36 hrs.

Coating Rate – 6 – 8 m²/L

Recoating – Out coat may be sufficient for ordinary finish; however, one additional coat can be applied wet on wet if necessary. Light sanding with 400-600 grit sand paper is recommended before subsequent coat when recoating time exceeds 3 hrs.

Basecoat – PU Parquet Sealer

The mixture ready for use, can be applied by brush, roller or spray. Floors must be free from contaminants. In the remaking of old floors and parquet, it is essential to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paints. If required to fill gaps, joints and holes, use recommended wood fillers. It is a must to used Exterior wood stain if necessary.
Apply 1 – 2 coats of PU Parquet Sealer, prior to application of PU PARQUET EXT.
  • Paint should be used within the pot life after components have been mixed together.
  • Never leave drums of Catalyst open.
brush-product