Polyurethane paints
PU matt d/20 clear
PU MATT D/20 CLEAR is a transparent polyurethane varnish based on saturated polyester resins, to provide smooth and satin finish with good covering properties and excellent hardness. Due to high quality of raw materials, it is resistant to water and mild acids and alkalis.
PU MATT D/20 CLEAR is excellent for wood furniture such as beds, cabinets, chairs, sofas, doors and frames.
Appearance – Transparent Liquid
Gloss @ 600 – 15 – 25
Specific Gravity (20°) – 0.98 +/- 0.05 kg/L
Viscosity (25°C, FC#4) – 40 – 60 sec.
Flash Point – 20°C
Solid Content (Wt.%) – 46 +/- 0.5
VOC – 650 g/L
Application Condition:
Air Temperature 5 – 35°C
Relative Humidity 85% max.
Application Method – Auto or Conventional Spray
Recommended Catalyst – Catalyst #034
Thinner – PU Thinner #105/205
Mixing/Dilution Ratio (FC #4, 13-15 sec.)
Base 100
Cat. 50
Thinner 20-25
Pot Life – 3 – 4 hrs.
Drying Time:
Dust Free 15 – 20 min.
Touch Free 30 – 45 min.
Recoat 1 – 2 hrs.
Hard 24 – 36 hrs.
Coverage – 7 – 8 m2/L
The surface to be top coated should be primed with either polyurethane or polyester sealer.
It should be cleaned, well-sanded and free from dust, oil water and other contaminants.
To a well-prepared surface, apply 1-2 coats of PU MATT D/20 CLEAR, horizontally and vertically.
One coat may be sufficient for ordinary finish however; one additional coat can be applied wet to wet if necessary. Light sanding with 400-600 mesh sand paper is recommended before subsequent coat when recoating time exceeds 3 hrs. and remove traces of wax.
It should be cleaned, well-sanded and free from dust, oil water and other contaminants.
To a well-prepared surface, apply 1-2 coats of PU MATT D/20 CLEAR, horizontally and vertically.
One coat may be sufficient for ordinary finish however; one additional coat can be applied wet to wet if necessary. Light sanding with 400-600 mesh sand paper is recommended before subsequent coat when recoating time exceeds 3 hrs. and remove traces of wax.
