Polyurethane paints

PU matt clear c/30

PU MATT CLEAR C/30 is s transparent polyurethane varnish based on saturated polyester resins, to provide smooth and satin finish with good covering properties and excellent hardness. Due to high quality of raw material, it is resistant to water and mild acids and alkalis.
PU MATT CLEAR C/30 is excellent for wood furniture such as beds, cabinets, chairs, sofas, doors and frames.

Appearance – Transparent Liquid

Gloss @ 60°C – 15 – 25

Specific Gravity (20°C) – 095+/-0.05 Kg/L

Viscosity (25°C, FC#4) – 40 – 60 sec.

Flash Point – 20°C

Solid Content (Wt.%) – 45 +/- 0.5

VOC – 660g/L

Application Condition:
Air Temperature 5 – 35°C
Relative Humidity 85% max.

Recommended Catalyst – Catalyst #034

Thinner – PU Thinner #105/205

Mixing/Dilution Ratio:
Base 100
Cat. 50
Thinner 25-30

Pot Life (20°C) – 3 – 4 hours

Drying Time:
Dust Free 15 – 20 minutes
To Touch 30 – 45 minutes
To Recoat 1 – 2 hours
Hard 24 – 36 hours

Pencil Hardness – HB-H

Basecoat – PU or Polyester Sealer

The surface to be top coated should be primed with either polyurethane or polyester sealer.
It should be cleaned, well-sanded and free from dust, oil water and other contaminants
To a well-prepared surface, apply 1-2 coats of PU MATT CLEAR C/30, horizontally and vertically.
One coat may be sufficient for ordinary finish however; one additional coat can be applied wet on wet if necessary. Light sanding with 400~600mesh sand paper is recommended before subsequent coat when recoating time exceeds 3 hours and remove traces of wax.