Polyurethane paints
pu lv gloss clear
PU LV GLOSS CLEAR is a clear polyurethane glossy varnish based on poly-functional saturated polyester resin. A varnish of two component materials with excellent covering properties and optimum brilliant finish. Due to its high solid content, it provided a U.V resistance; resistant to weathering and some limited acid spillage. PU LV GLOSS CLEAR meets the VOC content limit of Annex II, Phase II, Table A of European Directive 200/42/EC:2004
Highly recommended for household furniture such as beds, cabinets, chairs, sofas, doors, and frames turned pieces and the likes.
Specific Gravity – 0.950g/L
Viscosity @25°C – 25”FC #4
Flash Point – 20°C
Solid Content (wt.) – 48
Application Condition:
Air temperature 5 – 35°C
Relatively Humidity 85%max
Catalyst – Catalyst LV/03
Thinner – PU Thinner #105/205
Mixing/Dilution Ratio
Base 100
Cat. 50
Thinner 25-30
Pot Life – 3 – 4 hours
Drying Time:
Dust free 15 – 20 min.
Touch dry 30 – 45 min.
Hard dry 1 – 2 hrs.
Recoat 24 – 36 hrs.
Pencil hardness – HB-H
VOC – 203 g/L(EPA Method 240)
Basecoat – PU Sealer LV/5001
The surface to be top coated should be primed with either polyurethane primer or polyester primer
It should be cleaned, well-sanded and free from dust, oil, water and other contaminants.
To a well-prepared surface, apply 1-2 coats of PU LV GLOSS CLEAR, horizontally and vertically.
If additional coat is required to obtain a good finish, light sanding is necessary with 600-800 grit sandpaper prior to final coating.
It should be cleaned, well-sanded and free from dust, oil, water and other contaminants.
To a well-prepared surface, apply 1-2 coats of PU LV GLOSS CLEAR, horizontally and vertically.
If additional coat is required to obtain a good finish, light sanding is necessary with 600-800 grit sandpaper prior to final coating.
