Nitrocellulose based paints
NC Semigloss (Pigmented)
NC SEMIGLOSS (PIGMENTED) is a pigmented glossy top coat based on nitrocellulose and modified alkyd resin. Suitable to woods undercoated with nitrocellulose, polyurethane or polyester primer. Final coat is resistant to water, hardtop and sufficiently rub- resistant.
- STORAGE
- PHYSIOLOGICAL HAZARDS
- MAJOR USES
- CHARACTERISTICS & PHYSICAL PROPERTIES
- RECOMMENDED SYSTEM
- METHOD OF APPLICATION
Keep material in a cool place below 250C. Keep the container tightly closed. Shelf life of 12 months minimum.
NC SEMIGLOSS (PIGMENTED) does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use if safety tools and equipment. NC SEMIGLOSS (PIGMENTED) is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.
Furniture in general, chairs, turned pieces, picture mouldings, cabinets, doors, etc.,
Appearance – Liquid Pigmented
Colours – RAL/ NC/ APS
Sp. Weight – 1 – 1.15 g/L
Flash Point – 200C
Volume Solids – 37
Shelf Life – 12 months
Coverage – 8 – 10 m2/L
Thinner – 115 or 215
Dilution – 60 – 100%
Drying Time:
Dust Free – 10 – 15 minutes
Touch Dry – 30 – 40 minutes
Dry to recoat – 1 – 2 hours
Hard Dry – 2 – 3 hours
Piling Up – 24 hours
NC Putty #2185 White – Optional
NC Semigloss (Pigmented) – 2 coats
By spraying (2, 5-5, 6 atm)/Brushing
● For all prepared woods; 1 – 2 coats of NC SEMIGLOSS (PIGMENTED) thinned down with 60 – 100% N.C. Thinner.
● Let it dry, sand with fine sandpaper by manual sanding or automatic sanding machine.
● Repeat the top coating process, vertically and horizontally for a good finish.
