Nitrocellulose based paints

NC Metallic

NC METALLIC is a top coat lacquer based on nitrocellulose and modified alkyd resin and selected pearl powder. Suitable to woods undercoated with nitro, polyurethane or polyester primer. Final coat is resistant to water, hardtop and sufficiently rub-resistant.

Keep material in a cool place below 250C. Keep the container tightly closed. Shelf life of 12 months minimum.
NC METALLIC does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use if safety tools and equipment. NC METALLIC is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.
Furniture in general, chairs, turned pieces, picture mouldings, steel cabinets, appliances, etc.

Appearance – Metallic

Sp. Weight – 1.0 kg/L

Flash Point – 20°C

% Solids Weight – 39

% Solids Volume – 25

Shelf Life – 18 months

Coverage – 100 – 120g/m²

Dilution Thinner – 115/ 215

By Spraying (2, 5-5, 6 atm)/Brushing
● For all prepared woods; 1 – 2 coats of NC METALLIC thinned down with 60 – 100% N.C. Thinner.
● Let it dry, sand with fine sandpaper by manual sanding or automatic sanding machine.
● Repeat the top coating process, vertically and horizontally for a good finish.

Drying Time:

Dust Free – 10 – 15 minutes
Hard Dry – 2 hours
Set to Touch – 30 – 40 minutes
Piling Up – 24 hours