Nitrocellulose based paints

NC Sanding Sealer HB

A transparent sanding sealer of high quality based on nitrocellulose, modified alkyds and plasticizers. Used for filling and levelling wood surfaces where transparency is required. It has a very good body due to its higher solid content, resistant to over-spraying and wetting well the structure of the wood.

Keep material in a cool place below 25°C. Keep the container tightly closed. Shelf life of 12 months minimum.
NC SANDING SEALER HB does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use if safety tools and equipment. The mixture, in its liquid state is flammable and harmful if swallowed. If contact with eyes occurs, cleanse with fresh water and seed immediate medical advice.
NC SANDING SEALER HB is best for furniture in general, chairs, turned pieces and related products.

Appearance – Light Yellow, Opalescent

Sp. Gravity – 1.0+/-0.02

Flash Point – 10°C

Solids by Weight – 42%

Solids by Volume – 31.5%

Viscosity – 14 – 24 poise

Coverage – 8 – 9 m²/L

Dilution – 100 – 200%

Thinner – 115 & 215

Drying Time:

Touch Dry – 10 – 15 minutes

Hard Dry – 4 hours

Sandable – 20 – 25 minutes

  • Apply the desired dyed or stains (optional).
  • Spray NC SANDING SEALER HB cross-sectional into the surface 1 – 2 coats.
  • Sand it properly by manual or automatic sanding machine using 180 – 200 grit sand paper.
  • To fill deep grains, use wood putty filler (refer to technical data for colour range).
  • Repeat the same process prior to top coating.

Method of application: By Trowel/Conventional Spray
Spray Data
Conventional Spray

Nozzle Orifice – 2 – 3 mm

Nozzle Pressure – 43 – 57 psi.

Dilution – 50 – 100%

Thinner – 115