Nitrocellulose based paints
NC Auto Primer
NC AUTO PRIMER is an economical NC Primer based on a combination of alkyd, NC and synthetic resins, which exhibits excellent adhesion to pretreated, phosphate or sandblasted steel substrates.
- STORAGE
- PHYSIOLOGICAL HAZARDS
- MAJOR USES
- CHARACTERISTICS & PHYSICAL PROPERTIES
- SURFACE PREPARATION
- MIXING AND APPLICATION DATA
Store away from direct sunlight. Shelf life of one year in a closed container.
NC AUTO PRIMER does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use if safety tools and equipment. NC AUTO PRIMER is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.
As a primer of automotive refinishes, steel structures on mild environment, and steel furniture, which will be over coated with NC topcoats and synthetic enamels. Due to its excellent mechanical properties it is preferred primer for car refinishing sector.
Colour – White, Grey
Gloss – Matt
Volume Solids – 43 +/-2%
Flash Point – 9°C
Coverage – 15 – 17 m ²/L
Specific Weight – 1.25 kg/L
Drying time – 10 minutes
Hard dry – 30 minute
Recoating – 25 minutes
Thinner – 115/ 215
Non-Steel:
- Abrasive blasting to min. Sa 2 ½ if sand blasting is not possible power tool cleaning or wire brushing is recommended to minor touch up. All damaged primers and contamination should be removed and thoroughly cleaned prior to final painting.
Maintenance:
- Remove oil, grease and other contaminants before application.
Method of Application – Brush, Airless or Conventional Spray
Spray Data
Conventional Spray
Nozzle Orifice – 2 – 3 mm
Nozzle Pressure – 43 – 57 psi
Dilution – 40 – 80%
Airless Spray
Nozzle Orifice – 0.38 – 0.46 mm
Nozzle Pressure – 1138 – 1710 psi
Dilution – 20 – 40%
