Plastic emulsion
For interior use.
Good adhesion properties.
Good scrub resistance.
Good drying properties.
Easy of application.
Excellent resistance to dirt pick up.
Non-toxic and environment friendly.
Colour – As per colour card
Gloss – Matt
Specific Weight – 1.50 kg/L
Solid Content – 37% by volume
Coverage – 8 – 8.5 m2/L
Touch Dry – 1 – 2 hrs.
Recoat – 5 – 6 hrs.
Shelf Life – 12 months
Flash Point – >65°C
Application – By brush, roller and airless spray gun
New Substrates:
Substrate must be free from any form of contaminants.
Apply 1-2 coats of MAS Masonry AR Primer and MAS Masonry Primer White into the substrate.
Application of MAS PVA Wall filler to smoothen the surface.
Application of 1 – 2 coats of MAS PLASTIC EMULSION for final coatings.
Old Concrete (Previously Painted):
Remove all blistered, cracked and peeled off paint from the surface.
Penetrated paint must be cleared and treated with 3% ammonia and water.
Glossy finish coat must be sanded.
Apply 1 coat of Masonry Primer and PVA wall filler for uneven surfaces prior to application of MAS INTERIOR EMULSION.
Sputter Coat
Recommended Thinner – Sweet Water
Volume of Thinner – Approx. 0 – 5%
Nozzle Orifice – 4.0 – 6.0 mm
Roller
Recommended Thinner – Sweet Water
Volume of Thinner – Approx. 0 – 5%
