mastic royal
For use on interior and exterior surfaces, like plaster, stucco filler, gypsum boards, concrete and asbestos cement sheeting. MASTIC ROYAL is highly recommended for hospitals and public places, due to its active ingredients which exhibits extremely low water solubility and ensures long lasting protection against mildew and fungus. The active ingredients in MASTIC ROYAL meet the requirements of the XlVth and XXXVlth recommendations of the German Board of Health.
Appearance – Liquid Pigmented
Colour – As per colour card
Gloss – Eggshell/Silk/Semi-gloss/Gloss
Specific Gravity – 1.20 – 1.50 kg/L
Solid Content – 44 – 50% by volume
Coverage – 6 – 8 m2/L
Touch dry – 1 – 2 hrs.
Dry to recoat – 5 – 6 hrs.
Shelf Life – 12 months
Flash Point – 65°C
Application – By brush, roller and spray
Thinning/Cleaning – Water
New Substrates:
Substrate must be dry and free from any form of contaminants.
Apply 1 coat of MAS Masonry AR Primer as impregnating sealer.
Apply 1 – 2 coats of MAS Masonry Primer into the substrate.
Application of MAS PVA Wall filler to smoothen the surface.
Application of 1 – 2 coats of MASTIC ROYAL for final coatings.
Old Concrete (Previously Painted):
Remove all blistered, cracked and peeled off paint from the surface.
Penetrated paint must be cleared and treated with 3% ammonia and water.
Glossy finish coat must be sanded.
Apply 1 coat of MAS Masonry AR Primer, MAS Masonry Primer White and PVA Wall filler for uneven surfaces prior to application of MASTIC ROYAL.
INSTRUCTION FOR USE
Airless Spray
Recommended Thinner – Sweet Water
Volume Thinner – Approx. 0 – 5%
Nozzle Pressure – 140 – 190 kg/cm2
Nozzle Orifice – 0.021 – 0.027 in.
Roller
Recommended Thinner – Sweet Water
Volume of Thinner – Approx. 0 – 10%
Cleaning – Water