Masonry primer
MAS MASONRY PRIMER is a vinyl acrylic co-polymer based under coat. It has good flow and good penetration on different surfaces.
- MAJOR USES
- CHARACTERISTICS & PHYSICAL PROPERTIES
- APPLICATION METHOD
- SURFACE PREPARATION
- SYSTEM SPECIFICATION
For use on interior surfaces, like plaster, stucco filler, gypsum boards, concrete and asbestos cement sheeting. It is a new generation of coating that gives unmatched and long-lasting maintenance free protection for all buildings. It combines both elasticity and breathing properties.
Colour – White
% Solid – 34
Specific Weight – 1.45 g/L
Flash Point – >65°C
Coverage – 8 – 10 m2/L
Touch Dry – 60 min.
Recoat – 2 – 3 hrs.
Over-coating Interval
minimum – 12 hrs.
maximum – no limitations
Shelf Life – 12 months
Method of Application – By brush, roller or airless spray
Dilution – Max. 5% water
Airless Spray Data
Pressure – 140 – 190 kg/cm2
Nozzle tip – 0.021” – 0.027”
Spray Angle -65° – 80°
The substrate must be dry, free from dirt, grease, powder, laitance or other contaminations.
Impregnation primer to seal and reduce the porosity of the surface, to avoid uneven absorption and provide good adhesion for subsequent coating.
Suitable for interior application to plaster, brickwork, concrete, and rendered surface.
Use as primer coat in an emulsion or textured wall coating system.
Suitable for interior application to plaster, brickwork, concrete, and rendered surface.
Use as primer coat in an emulsion or textured wall coating system.
