durashield matt

DURASHIELD (MATT) is a high-quality latex emulsion paint based on 100% pure acrylic. It has good flow and does give a smooth, matt finish, it is washable and contains anti-bacterial and anti-fungal component.

For interior and exterior use.

Good adhesion properties.

Good water resistance.

Good scrub resistance.

Good drying properties.

Ease of application.

Excellent dirt picks up resistance.

Non-toxic and environment friendly.

Colour – As per colour card

Gloss – Matt

Specific Gravity – 1.300 ± 0.005 kg/L

Solid Content – 45% by volume

Coverage – 8 – 10.5 m2/L

Touch dry – 1 – 2 hours

Dry to recoat – 5 – 6 hours

Shelf life – 12 months

Flash point – 65°C

Thinning/cleaning – Water

Application – Brush, Roller, Spray Gun


New Substrates:
Substrate must be free from any form of contaminants.
Apply 1 coat of MAS Masonry AR Primer as impregnating sealer.
Apply 1-2 coats of MAS Acrylic Primer white into the substrate.
Application of MAS Acrylic Stucco filler to smoothen the surface.
Application of 1-2 coats of DURASHIELD (MATT) for final coatings.

Old Concrete (Previously Painted):
Remove all blistered, cracked and peeled off paint from the surface.
Penetrated paint must be cleared and treated with 3% ammonia and water.
Glossy finish coat must be sanded.
Apply 1 coat of Masonry AR Primer, MAS Acrylic Primer White and Acrylic Stucco Filler for uneven surfaces prior to application of DURASHIELD (MATT).


Airless Spray
Recommended Thinner Water – Sweet
Volume of Thinner – Approx. 0-5%
Nozzle Orifice – 0.46-.53 mm

Recommended Thinner Water – Sweet
Volume of Thinner – Approx. 5-10%
For cleaning – Sweet water

MAS Masonry AR Primer – 1 coat

MAS Acrylic Primer – 1 coat

Acrylic Stucco Filler – 2 coats

Durashield (MATT) – 2 coats