durashield gloss
- ADVANTAGES
- CHARACTERISTICS & PHYSICAL PROPERTIES
- SURFACE PREPARATION
- CHARACTERISTICS & PHYSICAL PROPERTIES
- TYPICAL RECOMMENDED SYSTEM
For interior use and heavy rain.
Long term anti-algae and anti-fungal protection.
Excellent water resistance.
High tolerance up to hairline crack.
Excellent adhesion properties.
Excellent scrub resistance.
Excellent dirt pick-up resistance.
Non-toxic and environment friendly.
Protection against concrete carbonation.
Colour – White and Pigmented
Gloss – Gloss
Specific Gravity – 1.25 ± 0.05 kg/L
Volume Solids – 37%
Coverage – 8-10 m2/L @ 25 microns
Drying Time:
Touch dry 1 – 2 hours
To recoat 5 – 6 hours
Shelf Life – 12 months
Flash Point – 650C
Application – Brush, Roller, Spray
Thinning/Cleaning – Water
New Substrates:
Substrate must be free from any form of contaminants.
Apply 1 coat of MAS Masonry AR Primer as impregnating sealer.
Apply 1-2 coats of MAS Acrylic Primer into the substrate.
Application of MAS Acrylic Stucco filler to smoothen the surface.
Old Concrete (Previously Painted):
Remove all blistered, cracked and peeled off paint from the surface.
Penetrated paint must be cleared and treated with 3% ammonia and water.
Glossy finish coat must be sanded.
Apply 1 coat of Masonry AR Primer, Mas Acrylic Primer White and Acrylic Stucco Filler for uneven surfaces prior to application of DURASHIELD GLOSS.
Airless Spray
Thinner – Sweet Water
Volume of Thinner – Approx. 0-5%
Nozzle orifice – 0.46-0.53 mm
Pressure – 2100 psi
Brush/Roller
Thinner – Sweet Water
Volume of Thinner – Approx. 5-10 %
MAS Acrylic Primer – 1 coat
MAS Acrylic Stucco Wallfiller – 1 coat
Durashield Gloss – 2 coats
