duracoat silk
Unsaponfiable/ alkaline resistant.
Good adhesion properties.
Good weather resistance.
Stain resistance.
Ease of application.
Excellent dirt picks up resistance.
Non-toxic and environment friendly.
Colour – As per colour card
Gloss – Silk
Specific Gravity – 1.2 – 1.3 +/- 0.5 kg/L
Solid Content – 45% by volume
Coverage – 8- 10.5 m2/L
Touch dry – 1 – 2 hrs.
Dry to recoat – 5 – 6 hrs.
Shelf Life – 12 months
Flash Point – 650C
Application – Brush, Roller and Airless Spray
Thinning/Cleaning – Water
New Substrates:
Substrate must be free from any form of contaminants.
Apply 1 coat of MAS Masonry AR Primer as impregnating sealer.
Apply 1 – 2 coats of MAS Acrylic Primer White into the substrate.
Application of MAS Acrylic Stucco Filler to smoothen the surface.
Application of 1 – 2 coats of DURACOAT SILK for final coatings.
Old Concrete (Previously Painted)
Remove all blistered, cracked and peeled off paint from the surface.
Penetrated paint must be cleared and treated with 3% ammonia and water.
Glossy finish coat must be sanded.
Apply 1 coat of Masonry AR Primer, MAS Acrylic Primer White and Acrylic Stucco filler for uneven surfaces prior to application of DURACOAT SILK.
INSTRUCTION FOR USE
Airless Spray
Recommended Thinner – Sweet Water
Volume Thinner – Approx. 0.5%
Nozzle Orifice – 0.46 – 53 mm.
Roller
Recommended Thinner – Sweet Water
Volume of Thinner – Approx. 5 – 10%
For Cleaning – Sweet Water
TYPICAL RECOMMENDED SYSTEM
MAS Masonry AR Primer – 1 coat
MAS Acrylic Primer – 1 coat
Acrylic Stucco Filler – 2 coats
DURACOAT SILK – 2 coats
