duracoat classic

DURACOAT CLASSIC is a high-quality latex emulsion paint based on acrylic copolymer. It has good flow and does give a smooth, matt finish it is washable and contains anti-bacterial and anti-fungal component.
For interior and exterior use.

Unsaponfiable/ alkaline resistant.

Good adhesion properties.

Good weather resistance.

Good scrub resistance.

Good drying properties.

Ease of application.

Excellent dirt picks up resistance.

Non-toxic and environment friendly.

Colour – As per colour card

Gloss – Matt

Specific Gravity – 1.3 +/- 0.5 kg/L

Solid Content – 45% by volume

Coverage – 8- 10.5 m2/L

Touch dry – 1 – 2 hrs.

Dry to recoat – 5 – 6 hrs.

Shelf Life – 12 months

Flash Point – 65°C

Application – Brush, Roller and Airless Spray

Thinning/Cleaning – Water

New Substrates:
Substrate must be free from any form of contaminants.
Apply 1 coat of MAS Masonry AR Primer as impregnating sealer.
Apply 1 – 2 coats of MAS Acrylic Primer White into the substrate.
Application of MAS Acrylic Stucco Filler to smoothen the surface.
Application of 1 – 2 coats of DURACOAT CLASSIC for final coating.

Old Concrete (Previously Painted)
Remove all blistered, cracked and peeled off paint from the surface.
Penetrated paint must be cleared and treated with 3% ammonia and water.
Glossy finish coat must be sanded.
Apply 1 coat of Masonry AR Primer, MAS Acrylic Primer White and Acrylic Stucco filler for uneven surfaces prior to application of DURACOAT CLASSIC.

INSTRUCTION FOR USE

Airless Spray
Recommended – Thinner Sweet Water
Volume Thinner – Approx. 0.5%
Nozzle Orifice – 0.46 – 55 mm.

Roller
Recommended Thinner – Approx. 5 – 10%
Sweet Water – Cleaning
Volume of Thinner – Sweet Water

TYPICAL RECOMMENDED SYSTEM
MAS Masonry AR Primer – 1 coat
MAS Acrylic Primer – 1 coat
Acrylic Stucco Filler – 2 coats
DURACOAT CLASSIC – 2 coats

brush-product