Water based wood paints
HYDROTUFF 2K (ANTI BACTERIAL)
HYDROTUFF 2K (ANTI BACTERIAL) is a catalyzed water-based polyurethane dispersion for interior/exterior coating. It is developed to provide a hard resistant film with excellent abrasion, good opacity, flow properties, high flexibility and environment-friendly. It contains anti bacterial component suitable for the protection against algal and fungal attack for surface coatings.
- MAJOR USES
- ADVANTAGES
- CHARACTERISTICS & PHYSICAL PROPERTIES
- STORAGE
- PHYSIOLOGICAL HAZARDS
- APPLICATION PROCEDURE
It is best recommended for coating floor surfaces, wooden furniture and the like. It is also widely used for metal application with suitable and compatible primer.
- Excellent hardness
- Flexible
- Non –toxic / environment – friendly
- Easy to apply
- Fast drying
Appearance: Pigmented
Specific Gravity: 1.20 kg/L
Viscosity: 40+/-5″ FC #4
Gloss: Gloss/Semigloss/Matt
Application Condition:
Air Temperature 5~35ºC
Relative humidity Max. 85%
Application Method: Brush/Spray
Mixing ratio: 10:1
Drying Time: (25ºC)
Dust Free 20–30min
To Touch 45–60min.
To Recoat 2-3 hrs
Piling 24–36hrs.
Coating Rate: 7-10 m2/L
Storage life: 12 months
Recommended primer:
Wood – Hydroprime # 100 White
Metal – Primart /Undercoat Enamel
Specific Gravity: 1.20 kg/L
Viscosity: 40+/-5″ FC #4
Gloss: Gloss/Semigloss/Matt
Application Condition:
Air Temperature 5~35ºC
Relative humidity Max. 85%
Application Method: Brush/Spray
Mixing ratio: 10:1
Drying Time: (25ºC)
Dust Free 20–30min
To Touch 45–60min.
To Recoat 2-3 hrs
Piling 24–36hrs.
Coating Rate: 7-10 m2/L
Storage life: 12 months
Recommended primer:
Wood – Hydroprime # 100 White
Metal – Primart /Undercoat Enamel
Store in the dark, cool and dry places. Shelf life up to 15 months in closed container.
See Safety Indication Sheet.
Mix base + hardener with recommended ratio and can be applied by brush or spray.
Surface to be coated must be free from dirt and other contaminants. In the remaking of old woods, it is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paints. First coat can be diluted with 5-10% with clean demineralised water, and allow to dry for an hour before sanding to remove any raise grain.
Ensure that HYDROTUFF 2K (ANTI BACRTERIAL) is applied uniformly and never leave unsealed surface to avoid moisture.
Surface to be coated must be free from dirt and other contaminants. In the remaking of old woods, it is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paints. First coat can be diluted with 5-10% with clean demineralised water, and allow to dry for an hour before sanding to remove any raise grain.
Ensure that HYDROTUFF 2K (ANTI BACRTERIAL) is applied uniformly and never leave unsealed surface to avoid moisture.
