Water based wood paints
HYDROPRIME 1000
HYDROPRIME 1000 is self cross-linking water based pigmented primer for interior / exterior wood coating. It is developed to provide a hard film but excellent sandability, high flexibility and environment friendly.
- MAJOR USES
- ADVANTAGES
- CHARACTERISTICS & PHYSICAL PROPERTIES
- STORAGE
- PHYSIOLOGICAL HAZARDS
- APPLICATION PROCEDURE
HYDROPRIME 1000 is mainly use as a basecoat for all types of water based topcoat (PU/Acrylic dispersion), and for all wood surfaces, thick woods, veneer, MDF, Bamboo canes and the like.
• Excellent hardness
• Flexible
• Easy to sand
• Fast drying
• Non –toxic / Environment – friendly.
• Flexible
• Easy to sand
• Fast drying
• Non –toxic / Environment – friendly.
Appearance: White
Specific Gravity: 1.089
Viscosity (250 C, FC # 4): 50-60 sec.
Gloss: Matt
Diluent: Water
Application Condition:
Air Temperature 5~35ºC
Relative humidity Max. 85%
Application Method: Brush, Airless (or) Electrostatic Spray
Drying Time: (25ºC)
Dust Free 20 – 30min
To Touch 45–60min.
To Recoat 1-2hrs
Sandable 2-3hrs
Coating Rate Recoating:
8 – 10 m2 / li (coverage will vary depending on porosity of surface)
Specific Gravity: 1.089
Viscosity (250 C, FC # 4): 50-60 sec.
Gloss: Matt
Diluent: Water
Application Condition:
Air Temperature 5~35ºC
Relative humidity Max. 85%
Application Method: Brush, Airless (or) Electrostatic Spray
Drying Time: (25ºC)
Dust Free 20 – 30min
To Touch 45–60min.
To Recoat 1-2hrs
Sandable 2-3hrs
Coating Rate Recoating:
8 – 10 m2 / li (coverage will vary depending on porosity of surface)
Store in the dark, cool and dry places. Shelf life up to 15 months in closed container.
HYDROPRIME 1000 does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. HYDROPRIME 1000 is harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.
• The mixture is ready for use and can be applied by brush or spray. Surface to be coated must be free of dirt and other contaminants. In the remaking of old woods, it is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paints
• HYDROPRIME 1000 can be diluted with 5- 10% with clean demineralised water, and allow to dry for an hour before sanding to remove any raise grain.
• Ensure that HYDROPRIME 1000 is applied uniformly and never leave unsealed surface to avoid moisture.
• HYDROPRIME 1000 can be diluted with 5- 10% with clean demineralised water, and allow to dry for an hour before sanding to remove any raise grain.
• Ensure that HYDROPRIME 1000 is applied uniformly and never leave unsealed surface to avoid moisture.
