General & Speciality products
ROAD MARKING PAINT
ROAD MARKING PAINT is based on alkyd resin and chlorinated rubber pigmented with selected pigment for a weather-resistant road marker.
It is general-purpose, durable, quick-drying, visible and can be applied over old paints, new concrete or asphalt surface.
- Road marking.
- Car parks.
- Metal preparations prior to painting.
- Factories.
- Warehouse.
Advantages:
- Good adhesion properties.
- Excellent chemical resistance.
- Good weather resistance.
- Abrasion-resistance.
- Good scratch resistance.
- Good inter-coat adhesion.
Colour – White, Yellow, Black
Gloss – Matt
Specific gravity – 1.33
Volume solids – 41%
Flash point – 20ºC
Surface dry @ 30ºC – 25 min.
Recoating interval – 4 – 6 hours
Fully cured – Over night
Dft. – 50 microns
Wft. – 120 microns
Coverage – 8 m2/L
Concrete:
New concrete should be cleared at least 14 days. Surface should be free from laitance, loose debris and other foreign contaminants prior to the application of Road Marking Paints.
Old:
The surface should be well cleaned before application of Road Marking Paint.
Asphalt:
The surface to be painted should be free of dirt, oil, grease, laitance, loose debris and other foreign contaminants.
Mixing and Application:
Stir contents of each container well before application.
Concrete:
New concrete should be cleared at least 14 days. Surface should be free from laitance, loose debris and other foreign contaminants prior to the application of Road Marking Paints.
Old:
The surface should be well cleaned before application of Road Marking Paint.
Asphalt:
The surface to be painted should be free of dirt, oil, grease, laitance, loose debris and other foreign contaminants.
Mixing and Application:
Stir contents of each container well before application.
Method of application – Brush, Roller, Airless and Conventional Spray
Spray Data – Conventional
Nozzle Orifice – 2 – 3 mm
Nozzle Pressure – 43 – 57 psi.
Dilution – 5 – 10%
Thinner – #255
Airless – Nozzle Orifice 0.38 – 0.46 mm – Nozzle Pressure 1138 – 1710 psi.
Dilution – 0 – 5%
Thinner – #255
Typical Recommended System – Road Marking Paint 2 coats
