Home » General & Speciality products » Mastherm 6000
Pail-Mas-Paints
General & Speciality products

Mastherm #6000

MASTHERM 6000 is an elastomeric insulating coat based on high grade acrylic resin and fillers to provide a thermal insulation to a wall surfaces and roof. It is formulated to protect the substrate from efflorescence and aggressive agent present in the environment and serve as a waterproofing. When applied directly to rust will convert iron oxide to iron sulphate, thus preventing further rusting problems.
download datasheet

Non-toxic.

Good adhesion properties.

Repels water vapour and humidity.

Allows the release of any moisture coming up from the ground by
capillary action.

Protect the formation of fungus and algae.

Anti-condensation and high terminal insulation property that reduce
up to 40%.

Inherent flexibility to accommodate hairline cracks in the substrate.

High build maintenance finishes.

Ease of application.

Colour – White and Pigmented

Gloss – Eggshell

Specific Gravity – 1.000 +/- 0.005 kg/L

Solid Content(%W) – 60

Coverage – 2 – 3 m2/L @ 200 microns

Touch Dry – 1 – 2 hrs.

Dry to Recoat – 5 – 6 hrs.

Shelf Life – 12 months

Flash Point – 65°C

Application – By brush, roller and airless spray gun

Dilution – Water

VOC – 37 g/L

New Substrates:

  • Substrate must be free from any form of contaminants.
  • Apply 1 coat of MAS Masonry AR Primer as impregnating sealer for concrete.
  • Apply 1 – 2 coats of MASTHERM 6000.

Old Concrete (Previously Painted):

  • Remove all blistered, cracked and peeled off paint from the surface.
  • Penetrated paint must be cleared and treated with 3% ammonia and water.
  • Glossy finish coat must be sanded.
  • Apply 1 coat of MAS Masonry AR Primer as impregnating sealer. Apply 1 – 2 coats of

    MASTHERM 6000

Metal:

  • Surface to be coated must be free from other
    contaminants (oil, grease and other foreign
    matters.)
  • Apply one (1) coat of MAS Aqua Metal Primer
    and keep it dry for 24 hours.
  • Apply MASTHERM 6000 at the rate of 200
    micron to attain the required specifications.

INSTRUCTION FOR USE

Airless Spray
Recommended Thinner – Sweet Water
Volume Thinner – Approx. 0 – 5%
Nozzle Orifice – 0.46 – 53 mm.

Roller
Recommended Thinner – Sweet Water
Volume of Thinner – Approx. 0 – 5%
Cleaning – Sweet Water

Concrete:
MAS Masonry AR Primer 1 coat
MASTHERM 6000 1 – 2 coats

Metal:
MAS Aqua Metal Primer 1 coat
MASTHERM 6000 1 – 2 coats

brush-product