General & Speciality products
mas protect wb
MAS PROTECT WB is a transparent specialty acrylic-based material formulated as protection for water-based interior and exterior decorative paint.
Request the TDS via
info@mas-paints.comor by filling out the form below.
info@mas-paints.comor by filling out the form below.
For use as a protective coating for special decorative paint to avoid fading and lime efflorescent. Wall transpiration is on the basis of DIN rule 52615 (detaching and support – sticking resistance DIN ISO 4624).
Colour – Transparent
Specific gravity – 1.0+/-0.1
Flashpoint – 60ºC
Viscosity (SP#4-60RPM) – 13 poises
%Solid Content – 28 +/-0.2
Application details
Application method – Brush/Roller
Mixing ratio – Ready to use or with 10% water.
The surface must be clean, dry, free from dirt, oil, grease and other foreign matters. If detergent is used for cleaning, rinse with fresh water.
The temperature of the substrate should be min 5ºC, above the dew point. Avoid painting in direct sunlight.
Drying time:
On the surface @ 25ºC – 5 hrs.
Over painting @ 25ºC – 8 hrs.
Below the surface @ 25ºC – 12 hrs.
Recommended System:
Decorative Paint – 1 coat
MAS PROTECT WB – 1 – 2 coats
