General & Speciality products

HIGH HEAT PAINT

HIGH HEAT PAINT is based on modified silicone resin fortified with high-quality pigments. The system cures by solvent evaporation, polymerization and subsequently by the fusion of the pigments. It can resist up to 500ºC.
  • For use on exterior surfaces such as stacks, pipes, stoves, chimney, mufflers, exhaust pipes, engine parts and other metal parts.
  • Whenever maximum heat and chemical resistance is required.
  • Not recommended for use on the inside of ovens, stacks, etc.,
  • High Heat Paint is resistant up to 500ºC.
  • Excellent weathering characteristics.
  • Corrosion-resistant.

 

Appearance – Pigmented

Specific weight – 1.2- 1.5 kg/L

Flashpoint – 28ºC

Viscosity@25ºC – 24 sec.

Coverage – 10 – 12 m2/L

Reducer/Thinner – Xylene

Shelf life – 18 months

Drying Time – Dust-free 20 – 25 minutes, To touch 40 – 45 minutes, Recoat 2 hours (Hot cure required)

 

The surface must be clean, dry and in good condition. Remove all oil, dust, grease, dirt, loose rust and other foreign material to ensure adequate adhesion, which can be applied by brush or spray.

Mix paint thoroughly by stirring before use. Avoid incorporation of air with the paint.

brush-product