aluminium paint
MAS ALUMINUM is a decorative aluminum paint based on special synthetic alkyd resins to provide maximum brightness and reflectance.
info@mas-paints.comor by filling out the form below.
- MAJOR USES
- CHARACTERISTICS & PHYSICAL PROPERTIES
- APPLICATION DETAILS
- SURFACE PREPARATION
- DRYING TIME
- RECOMMENDED SYSTEM
For use as protective and decorative topcoat on alkyd paints and undercoats.
Heat resistant (medium temperature) to steel, pipes and related products.
Colours – Aluminum
Volume Solids – 40 +/-2
Specific Gravity – 0.94 – 0.98
Flash Point – 30°C
Coverage – 12 – 15 m² / lit.
Dft. – 30 microns
Wft. – 75
Method of Application – By Brush, Spray
Mixing Ratio – Single Pack
Thinner/Cleaner – Thinner #155
Surface must be clean, dry, and free from dirt, oil, grease and other foreign matters. If detergent is used for cleaning, rinse with fresh water.
Dry Touch @25°C 5 hrs.
Hard Dry @25°C 5 hrs.
Recoating Time @25°C 8 – 12 hrs.
Option I
Red Oxide Primer 1 coat
MAS ALUMINUM 1 coat
Option II
MAS ALUMINUM 2 coats
