epoprime basecoat

Good adhesion properties

Excellent chemical resistance

Compatible

Good weather resistance

Abrasion-resistant

Colour -White, Red Oxide, Gray, Yellow Oxide

Appearance -Eggshell

Specific Gravity – 1.40 kg/L

Volume Solids – 50%

Flash Point – 250C

Pot Life – 6 hrs.

Surface Dry – 5 hrs.

Steel:
Metal surfaces should be free from grease, oil and other contaminants. Grit blasting to Sa2 ½ is much preferred to wire brushing and other methods of abrasion. Immediately after blasting the surface should be primed with EPOPRIME BASECOAT.

Concrete:
New concrete should be cleared at least 28 days. Apply one (1) coat of multi-etch solution, rinse and let it dry. Surface should be free from laitance, loose debris and other foreign contaminants prior to the application of EPOPRIME BASECOAT.

Wood and Plastics:
Surface to be primed should be free of rust, dirt, oil and grease. Apply 1 coat of Uniseal #110 P as a surface conditioner for a better anchorage of EPOPRIME BASECOAT.

Application Method – Brush, Roller, Airless and Conventional Spray

Spray Data – Conventional Spray

Nozzle Orifice – 2-3 mm.

Nozzle Pressure – 43-57 psi.

Dilution – 5-10%

Thinner – EP Thinner #135

Airless

Nozzle Orifice – 0.38–0.46 mm.

Nozzle Pressure – 1138 psi

Dilution – 0-5%

Thinner – EP Thinner #135