decorative paints


MAS TILAL is a water-based decorative for interior and exterior paints that renders professional results with simple application convenience. Unlike traditional flux finishes, MAS TILAL does not elaborate intermixing of colours, layering techniques or sophisticated equipment. Simple effortless trowelling is all that required to achieve this very exquisite effect. Due to the natural mineral-blend, it provides a Marmorino effect that gives an elegant monochromatic effect and most importantly, it is environment friendly.

Can be applied on to walls, columns, and other curved surfaces leaving a joint free finish. For external application protection coat of MAS PROTECT is required to ensure a long-lasting effect.

Viscosity – Paste

Specific Weight – 1.50 kg/L

Yield – 750 – 1000 gms/m2

Touch Dry – 1 – 2 hours

Gloss – Matt

Shelf Life – 12 months

Application – Trowel

Dilution – Not required

VOC – 4.0 g/L

Allow new masonry to dry for 14 days under normal weather conditions before painting. Treat new concrete with a neutralizer and let it dry overnight before rinsing with water to remove white crystal (efflorescence) that form on the surface. Let dry for painting. The surface to be painted should be free from oil, grease, dust, dirt, contaminants and all loose grit and mortar. If repainting, remove all loose paint, scaling, flaking, and peeling paint by PAINT REMOVER, rinse and let dry.

Wooden surfaces should be sanded smooth to touch and no silvers on rough edges should remain. Dust-off the surface, then wipes with a clean rag.

Prime concrete with MAS Masonry Primer (interior), MAS Acrylic Prime White (exterior) and MAS Undercoat Enamel for wooden surfaces. After primer application applies MAS TILAL by trowel uniformly to fully cover the surfaces. To attain double colour effects, apply another coat of the desired tone by trowel and scrape by spatula to enhance the design.