decorative paints
stucco
MAS STUCCO is water-based putty, based on emulsion resins; special oils and common mineral limes to provide a marble-like finish effect. The glossy appearance and shade of differences obtain gives unique and a great value of decoration for interior.
- Wall decorative coating for interior plasters and gypsum.
- Water soluble material and environmentally safe.
- Smooth to touch, odourless, non-toxic and extremely pleasing in appearance.
Colour – See product catalogues
Appearance – Glossy with matt shade
Density – 1.85 kg/L
Volume – 54%
Coverage – Plaster
Gypsum – 1.0 – 1.5 kg/m2, 0.4 – 0.6 kg/m2
Average coats – 2 or more
Drying time – 4-6 hours
Recoating – After 6 hours
Dilution – Ready to use
VOC – 35gms/L
Prime the substrate with MAS Masonry Primer or Primart on very absorbent and chalky surfaces. Fill any imperfections with PVA Wall filler and seal the surface with Mascryl, Matt Emulsion preferable with a colour closest to the required Stucco.
Smooth the surface by stainless steel spatula using Stucco to get a uniform finish.
After 6 hours from the last coat, sand with sand paper in order to smooth the surface and take off surface defects.
Apply the last coat of marble stucco by stainless steel spatula thoroughly. To obtain a different effect, choose a different size spatula, and apply artistically.
After 5-10 minus press the spatula and move it on the surface to obtain more glossy effects.
