decorative paints
seta
MAS SETA is decorative trowel coating with dramatic metallic effect. It provides silky polychromatic finish that enhances the beauty of indoor surfaces.
The product is given a high level of breathability, prevents mildew and fungi growth, UV resistant and environment friendly.
The product is given a high level of breathability, prevents mildew and fungi growth, UV resistant and environment friendly.
- STORAGE
- PHYSIOLOGICAL HAZARDS
- CHARACTERISTICS & PHYSICAL PROPERTIES
- SURFACE PREPARATION
- TYPICAL RECOMMENDED SYSTEM
The product must be stored in accordance with national regulations. The product should be kept in a cool and well-ventilated place, protected from heat and direct sunlight, containers must be kept tightly closed.
SETA is a water-based paint and does not contain solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. MAS SETA is harmful if swallowed, if contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.
Viscosity – Pasty
Thinning/Cleaning – Water
Yield – 100 – 125g/m2
Touch dry – 1-2 hours
Appearance – Silky
Shelf Life – 12 months
Application – Trowel
Dilution – Not Recommend
VOC – 45g/L
- For the new concrete, it should be fully cured at least 28 days and the substrate must be free from any form of contaminants
- If old concrete, all blistered, cracks and peeled off paint should be removed.
- Penetrated paint must be cleared and treated with 3% ammonia and water.
- Glossy finish coat must be sanded.
- Apply 1 coat of MAS Masonry Primer.
- Level the surface with PVA Wall Filler If necessary and sand until smooth.
- Apply 1-2 coats of Masonry Primer tinted with desired colour.
- Apply 1-2 coats of MAS SETA tinted and diluted with 30% with water as a base coat.
- Apply the effect coat using the explained tools and technique.
