decorative paints
linol
Appearance – White Paint
Specific Weight – 0.800 – 1.00kg/L
Dilution – Ready to use
Coverage – 8 – 10 m2/L
Drying time – 3 – 4 hours at 200C
VOC – 37g/L
Method of Application – By brush or roller
Resistance – Good resistance for abrasion once hardened
Washability – Good after hardened using water and normal detergent
Stability – Approximately 1year min. into the packaging.
Best applied for interior and exterior walls, PVC, Steel and wood.
Please ensure that the surface is properly prepared by application of MAS Acrylic Masonry Primer, MAS PVA Wall Filler and Mascryl (any choices of colours as an intermediate coat prior to the application of MAS LINOL. Is imperative to ensure that the surface to be coated should be free from other contaminants, oil, grease and concrete laitance.
Classic Effect:
Apply the paint using the special brush in an oblique direction from the top to bottom, alternating the strokes from right to left, in the same direction, wait 10-15 minutes until the smooth parts is dried, rough is still wet. Smooth the surface with the special spatula following the used direction. After 4-5 hours apply another coat with the same technique following the same direction, with another direction you can obtain another effect.
Antique Effect:
Follow the classic method going in a horizontal or vertical direction one coat only obtaining beautiful effect. This product is so malleable satisfying your creativity.
- White base
- Premeasured colourant to get required colours
