ACRYLIC BASED PAINTS
acrylic steelcote
ACRYLIC STEELCOTE is a special acrylic based, fast drying topcoat developed to give a hard film, good colour retention and resistance to water and to extreme climatic condition.
As a protective coating for steel pipes. It is also recommended for industrial applications.
Colour – Clear and Pigmented
Gloss – Gloss
Specific Gravity – 0.950 – 1.20 kg/L
Flash Point – 25°C
% Volume Solids – 32 +/- 2
DFT – 25 microns
Coverage – 10 – 12 m2/L
Method of Application – By roller and spray
Mixing Ratio – Single pack
Thinner/Cleaner – Thinner #255
Surface must be clean, dry and free from dirt, oil, grease and other foreign matters. It detergent is used for cleaning, rinse with fresh water.
The temperature of the substrate should be min 50C above the dew point. Avoid painting on direct sunlight.
Apply the materials ready to use or of dilution is needed, follow instructions on the mixing ratio mentioned in this Technical Data Sheet.
The minimum application temperature is 50C and humidity must not exceed 85%.
