Acrylic based paints

acrylic semigloss clear uv/077

ACRYLIC SEMIGLOSS CLEAR UV/077 is based on non-yellowing hydroxyl functional acrylic resins and saturated isocyanates. It is weather resistant, high gloss and provides efficient protection to light sensitive substrates such as woods and plastics.
Recommended for outdoor furniture, steel gates, external doors and frames, automotive refinishes, industrial and trade sales coatings.

Appearance – Clear Liquid

Specific Gravity (200C) – 0.96 +/- 0.1

Viscosity (250C FC#4) – 45 sec.

Flash Point – 23C

Non-Volatile (wt.%) 50 +/- 0.5

Gloss (600) – 50

Application Condition
Air Temperature 5 – 35C
Relative Humidity 85% max.

Application Method – Brush, Spray, Roller

Recommended Catalyst – Catalyst #026

Thinner – PU Thinner #305/205/105

Mixing/Dilution Ratio
Base 100
Hardener 20
Thinner 25/30

Pot Life (200C) – 5 – 6 hours

Drying Time (200C)
Dust Free 20 – 25 min.
To Touch 30 – 45 min
To Recoat 2 – 3 hours
Hard 24 – 36 hours

Coating Rate – 8-12 m2/L (80-120 gms/m2)

One coat may be sufficient for ordinary finish. However, one additional coat can be applied wet on wet if necessary. Light sanding with 400-600 mesh sand paper is recommended before subsequent coat.

Recommended Sealer
Acrylic Sanding Sealer UV/071

The mixture ready for use, can be applied by brush, roller or spray. Surface to be painted must be free of dirt and other contaminants. In the remaking of old woods, it is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paint. Apply 1 – 2 coats of Acrylic Sanding Sealer UV/071 prior to application of Acrylic Semigloss Clear UV/077.

Acrylic Sealer UV/071 – 2 coats

Acrylic Semigloss UV/077 – 1 coat

Never leave drums of catalyst open. Paint should be used within the pot life after components have been mixed together.