Home » Wood Paints » Acrylic based paints » Acrylic semigloss clear ta/067
Pail-Mas-Paints

ACRYLIC BASED PAINTS

Acrylic semigloss clear ta/067

ACRYLIC SEMIGLOSS CLEAR TA/067 is based on non-yellowing hydroxyl functional acrylic resins and saturated isocyanates. It is weather resistant, high gloss and provides efficient protection to light sensitive substrates such as woods and plastics.
download datasheet
Recommended for outdoor furniture, steel gates, external doors and frames, automotive refinishes, industrial and trade sales coatings.

Appearance – Clear Transparent Liquid

Specific Gravity(200C) – 0.96 +/- 0.1

Viscosity (250C FC # 4) – 45 sec.

Flash Point – 230C

Non-Volatile (wt.%) – 50 +/- 0.5

Gloss(600) – Semi-Gloss

Application Condition
Air Temperature 5 – 350C
Relative Humidity 85% max.

Application Method – Brush, Roller, Spray

Recommended Catalyst – Catalyst #026

Thinner – PU Thinner #105

Mixing/Dilution Ratio
Base 100
Hardener 20
Thinner 25/30

Pot Life – 5 – 6 hours

Drying Time (200C)
Dust Free 20 – 25 min.
To Touch 30 – 45 min
To Recoat 2 – 3 hours
Hard 24 – 36 hours

Coating Rate – 12 – 14 m2/L (80-120gms/m2)

Recoating
One coat may be sufficient for ordinary finish however; one additional coat can be applied wet on wet if necessary. Light sanding with 400 – 600 mesh sand paper is recommended before subsequent coats, when recoating time exceeds 3 hrs.

Recommended Sealer – Acrylic Sanding Sealer TA/061

The mixture ready for use, can be applied by brush, roller or spray. Surface to be painted must be free of dirt and other contaminants. In the remaking of old woods, it is imperative to ensure a perfect adhesion of paint. Apply 1 – 2 coats of Acrylic Sanding Sealer UV/061 prior to application of ACRYLIC SEMIGLOSS CLEAR TA/067.

Acrylic Sanding Sealer TA/061 – 2 coats

Acrylic Semigloss Clear TA/067 – 1 coat

Precautions:
Never leave drums of Catalyst open. Paint should be used within the pot life after components have been mixed together.

brush-product