Acrylic based paints
acrylic primer white #100
ACRYLIC PRIMER WHITE #100 is based on acrylic resin for a non-yellowing basecoat. It is developed to provide a good covering and good sandability. It is weather resistant, unaffected by humidity, heat and sunlight.
Best recommended for furniture, tables, chairs doors and frames, outdoors furniture and external wood works.
Appearance – Liquid White
Specific Gravity (200C) – 1.50 + /-0.1 kg/L
Viscosity (250C, FC # 4) – 60 sec.
Flash Point – 230C
Non-Volatile (Wt.%) – 70 + /- 0.5
Gloss (600C) – 50
Application Condition
Air Temperature 5 – 350C
Relative Humidity 85% max.
Application Method – Brush, Spray, Roller
Recommended Catalyst – Catalyst #026
Thinner – PU Thinner #105/205/305
Mixing / Dilution Ratio
Base 100
Hardener 20
Thinner 25-30
Pot Life(200C) – 5 – 6 hours
Drying Time
Dust Free 30 – 45 min.
To Touch 45 – 60 min
To Recoat 2 – 3 hours
Hard – 12 – 24 hours
Coating Rate
5-7 m2/L (120-150 gms/m2)
Recoating
Minimum 60 min – max 3 hours drying time. Medium sanding with 240 – 360 mesh sand paper is recommended before subsequent coat is needed.
The mixture ready for use, can be applied by brush, roller or spray. Surface to be painted must be free of dirt and other contaminants. In the remaking of old woods, it is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paint. Apply 1 – 2 coats of Acrylic Primer White #100 vertically and horizontally.
Mixing ratio should be correctly observed.
Paint should be used within the pot life after components have been mixed together.
Pot life decreases at high temperature.
Bubbling due to excessive coatings within relatively short time is likely to occur in summer 1 – 2 thin initial coat and longer recoating interval (50 – 60 min.) eliminates bubbling.
Never leave drums of Catalyst open.
Paint should be used within the pot life after components have been mixed together.
Pot life decreases at high temperature.
Bubbling due to excessive coatings within relatively short time is likely to occur in summer 1 – 2 thin initial coat and longer recoating interval (50 – 60 min.) eliminates bubbling.
Never leave drums of Catalyst open.
