acrylic matt ta/066 clear

ACRYLIC MATT TA/066 CLEAR is based on non-yellowing hydroxyl functional acrylic resins and saturated isocyanates, satin finish with good covering properties for external application. It is weather resistant, unaffected by humidity, heat and sunlight.
Recommended for outdoor furniture, steel gates, external doors and frames, wood trenches and hardwood.

Appearance – Opaque

Specific gravity – 0.973 kg/L @ 250C

Viscosity – 25” FC # 4 @ 250C

Flash Point – 230C

Non-Volatile – 33% (W)

Gloss (600) 10/20/30

Application Condition
Air Temperature 5 – 350C
Relative Humidity 85% max.

Application Method – Brush, Roller, Spray

Catalyst – Catalyst #026

Thinner – PU Thinner #105/205/305

Mixing Ratio (V) (Visc.=13-15”FC#4)
Base 100
Catalyst 20
Thinner 25/30

Pot Life – 5 – 6 hours

Drying Time (200C)
Dust Free 20 – 25 min.
To Touch 30 – 45 min
To Recoat 2 – 3 hours
Hard 24 – 36 hours

Coating Rate 8 – 12 m2/L (80-120 g/m2)

Basecoat – Acrylic Sealer TA/061

The mixture ready for use, can be applied by brush, roller or spray. Surface to be painted must be free of dirt and other contaminants. In the remaking of old woods, it is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paint. Apply 1 – 2 coats of Acrylic Sealer TA/061 prior to application of ACRYLIC MATT TA/066 CLEAR.
One coat may be sufficient for ordinary finish. However, one additional coat can be applied wet on wet if necessary. Light sanding with 400 – 600 grit sand paper is recommended before subsequent coats when recoating time exceeds three (3) hours.