Acrylic based paints

acrylic matt lv/086

ACRYLIC MATT LV/086 is based on non-yellowing hydroxyl functional acrylic resins and saturated isocyanates, satin finish with good covering properties for external application. It is weather resistant, unaffected by humidity, heat and sunlight. ACRYLIC MATT LV/086 meets the VOC content limit of Annex 11, Phase 11, Table A of European Directive 2004/42/EC:2004.
Recommended for outdoor furniture, steel gates, external doors and frames, wood trenches and hardwood.

Appearance – Transparent Liquid

Specific Gravity – 0.960 g/L

Viscosity @ 250C – 25” FC #4

Flash Point – 230C

Solid content (Wt.) – 33

Application Condition

Air Temperature 5 – 350C

Relative Humidity – 85% max.

Application Method – Brush, Spray, Roller

Catalyst – Catalyst LV/26

Thinner – PU Thinner #105/205

Mixing/Dilution ratio (13-15” FC # 4 )
Base 100
Hardener 20
Thinner 25-30

Pot Life – 5-6 hours

Drying Time (200C)
Dust-Free 20 – 25 min.
To Touch 30 – 45 min
To Recoat 2 – 3 hours
Hard 24 – 36 hours

Coverage 7 – 8 m2/L (80-120 g/m2)

One coat may be sufficient for ordinary finish, however; one additional coat can be applied wet on wet if necessary. Light sanding with 400 – 600 grit sand paper is recommended before subsequent coats. When exceeds 3 hours.

Basecoat – Acrylic Sealer LV/081

The mixture ready for use, can be applied by brush, roller or spray. Surface to be painted must be free of dirt and other contaminants. In the remaking of old woods, it is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paint. Apply 1 – 2 coats of Acrylic Sanding Sealer LV/081 prior to application of ACRYLIC MATT LV/086.