Acrylic based paints

acrylic matt clear uv/076

ACRYLIC MATT CLEAR UV/076 is based on non-yellowing hydroxyl functional acrylic resins and saturated isocyanates. It is weather resistant and provides efficient protection to light sensitive substrates such as woods and plastics.
Recommended for outdoor furniture, steel gates, external doors and frames, automotive refinishes, industrial and trade sales coatings.

Appearance – Clear

Specific Gravity – 0.96 kg/L

Viscosity – 35” @ 250C FC#4

Flash Point – 230C

Non-Volatile – 30% (w)

Gloss (600) – 10/ 20/ 30

Application Condition
Air Temperature 5 – 35C
Relative Humidity 85% max.

Application Method – Brush, Spray

Recommended Catalyst – Catalyst #026

Thinner – PU Thinner #305/205

Mixing Ratio
Base 100
Catalyst 20
Thinner 25

Pot Life – 5 – 6 hours

Drying Time @ 25C
Dust Free 20 – 25 min.
To Touch 30 – 45 min
To Recoat 2 – 3 hours
Hard 24 – 36 hours

Coating Rate – 8-10 m2/L (80-120 g/m2)

One coat may be sufficient for ordinary finish. However, one additional coat can be applied wet on wet if necessary. Light sanding with 400-600 grit sand paper is recommended before subsequent coats.

The mixture ready for use, can be applied by brush, roller or spray. Surface to be painted must be free of dirt and other contaminants. In the remaking of old woods, it is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paint. Apply 1 – 2 coats of Acrylic Sealer UV/071 prior to application of Acrylic Matt Clear UV/076.
Acrylic Sanding Sealer UV/071 2 coats

Acrylic Clear UV/076 1 coat

Never leave drums of catalyst open. Paint should be used within the pot life after components have been mixed together.