acrylic gloss clear uv/075

ACRYLIC GLOSS CLEAR UV/075 is based on non-yellowing hydroxyl functional acrylic resins and saturated isocyanates. It is weather resistant, high gloss and provides efficient protection to light sensitive substrates such as woods and plastics.
Best recommended for outdoors furniture, steel gates, external doors and frames, automotive refinishes, industrial and trade sales coatings.

Appearance – Clear Liquid

Specific Gravity (200C) – 0.96 +/-0.1

Viscosity (250C, FC 4) – 45 sec.

Flash Point – 23C

Non-Volatile (wt.%) – 55 +/- 0.5

Gloss (600C) – Glossy

Application Condition
Air Temperature 5 – 350C
Relative Humidity 85% max.

Application Method – Brush, Roller, Spray

Recommended Catalyst – Catalyst #026

PU Thinner #105/205
AR Thinner #305

Mixing/Dilution Ratio
Base 100
Catalyst 50
Thinner 25/30

Pot Life (200C) – 5 – 6 hours

Drying Time
Dust Free 20 – 25 min.
To Touch 35 – 45 min
To Recoat 2 – 3 hrs.
Hard 24 – 36 hrs.

Basecoat – Acrylic Sealer UV/071

One coat may be sufficient for ordinary finish however, one additional coat can be applied wet on wet of necessary. Light sanding with 400 – 600 mesh sand paper is recommended before subsequent coats.
The mixture ready for use, can be applied by brush, roller or spray.
Surface to be painted must be free of dirt and other contaminants.
In the remaking of old woods, it is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paint.
Apply 1 – 2 coat of Acrylic Sanding Sealer UV/071 prior to application of Acrylic Gloss Clear UV/075.