acrylic 2k semigloss black

Appearance – Black

Specific Gravity (20°C) – 1.10

Viscosity (25°C FC # 4) – 40”

Flash Point – 200C

Non-Volatile (Wt.%) – 50

Gloss(600) – 50+/-5

Application Condition
Air Temperature 5 – 35°C
Relative Humidity 85% max.

Application Method – Brush, Spray or Roller

Recommended Catalyst – Catalyst #042

Thinner – PU Thinner #305/205

Mixing /Dilution Ratio (wt%) (FC # 4 = 13-15 sec.)
Base 100
Hardener 50
Thinner 25-30

Pot Life – 5 – 6 hours

Drying Time (20°C)
Dust Free 30 – 35 min.
To Touch 45 – 60 min
To Recoat 2 – 3 hours
Hard 24 – 36 hours

Recoating:
One coat may be sufficient for ordinary finish however; one additional coat can be applied wet on wet if necessary. Light sanding with 400 – 600 mesh sand paper is recommended before subsequent coats, when recoating time exceeds 3 hrs.

Recommended Under Coat – Acrylic Primer or Epoxy Basecoat.

Application Procedure:
The mixture can be applied by brush, roller or spray. Surface to be painted must be free from dirt and other contaminants. In the remaking of old surface, it is imperative to remove traces of wax, dirt and other foreign matter to ensure a perfect adhesion of paint. Apply 1 – 2 coats of Acrylic or Epoxy Basecoat prior to application of ACRYLIC 2K SEMIGLOSS BLACK.

Acrylic or Epoxy Basecoat – 2 coats

Acrylic Intermediate coat – 2 coats

Acrylic 2k Semigloss Black – 1 coat

Precautions:
Paint should be within the pot life after components have been mixed together.
Never leave drums of catalyst open.