Acrylic 2k matt clear

Appearance – Clear Opaque

Specific Gravity – 0.96 kg/L

Viscosity – 45”

Flash Point – 20C

Non-volatile(%w) – 42

Gloss(600) – 10 – 40

Application Condition
Air Temperature 5 – 35C
Relative Humidity 85% max.

Application Method – Spray

Recommended Catalyst – Catalyst #042

Thinner – PU Thinner #305/205

Mixing ratio (%v) (visc=13-15” FC#4)
Base 100
Cat. 50
Thinner 20/25

Pot Life (200C) – 5 – 6 hours

Drying Time (200C)
Dust Free 30 – 35 min.
To Touch 45 – 60 min
To Recoat 2 – 3 hours
Hard 24 – 36 hours

Recoating
One coat may be sufficient for ordinary finish, however; one additional coat can be applied wet on wet if necessary. Light sanding with 400-600 grit sand paper is recommended before subsequent coats when recoating time exceeds 3 hrs.

Recommended Under Coat –  Acrylic or Epoxy Basecoat.

Application Procedure
The mixture can be applied by brush, roller of spray. Surface to be painted must be free from dirt and other contaminants. In the remaking of old surface, it is imperative to remove traces of wax, dirt and other foreign matter to ensure a perfect adhesion of paint. Apply 1 – 2 coats of Acrylic or Epoxy Basecoat prior to application of ACRYLIC 2K.

Acrylic or Epoxy Basecoat – 2 coats

Acrylic Intermediate Coat – 2 coats

Acrylic 2K Matt Clear

PRECAUTIONS:
Paint should be used within the pot life after components have been mixed together.
Never leave drums of catalyst open.