Home » Wood Paints » Acrylic based paints » Acrylic 2k gloss clear
Pail-Mas-Paints

Acrylic based paints

acrylic 2k gloss clear

ACRYLIC 2K GLOSS CLEAR is based on non-yellowing hydroxyl functional acrylic resins and saturated isocyanates. It is weather resistant, unaffected by humidity, heat and sunlight.
download datasheet
Recommended for outdoor furniture, steel gates, external doors and frames, and automotive refinishes.

Appearance – Clear

Specific Gravity (20C) – 0.96

Viscosity (25C,FC#4) – 45”

Flash Point – 20C

Non-Volatile (Wt.%) – 53

Gloss(600) – 95 – 100

Application Condition
Air Temperature 5 – 35C
Relative Humidity 85% max.

Application Method – Brush, Spray or Roller

Recommended Cat. – Catalyst #052

Thinner – Thinner #205/305

Mixing/Dilution Ratio(Wt%) (FC#4 13 – 15 Sec.)
Base 100
Cat. 50
Thinner 25/30

Pot Life (200C) – 5 – 6 hours

Drying Time (20C)
Dust Free 30 – 35 min.
To Touch 45 – 60 min
To Recoat 2 – 3 hours
Hard 24 – 36 hours

Coating Rate – 7 – 9 m2/L

Recoating
One coat may be sufficient for ordinary finish however; one additional coat can be applied wet on wet if necessary. Light sanding with 400-600 mesh sand paper is recommended before subsequent coats when recoating time exceeds 3 hrs.

Acrylic or Epoxy Basecoat.
The mixture can be applied by brush, roller of spray. Surface to be painted must be free from dirt and other contaminants. In the remaking of old surface, it is imperative to remove traces of wax, dirt and other foreign matter to ensure a perfect adhesion of paint. Apply 1 – 2 coats of Acrylic or Epoxy Basecoat prior to application of ACRYLIC 2K.

Acrylic or Epoxy Basecoat – 2 coats

Acrylic Intermediate Coat – 2 coats

Acrylic 2K Gloss Clear – 1 coat

PRECAUTIONS:
Paint should be used within the pot life after components have been mixed together.
Never leave drums of catalyst open.

brush-product