Nitrocellulose based paints
NC Sanding Sealer Clear #021
A transparent sanding sealer of high quality based on nitrocellulose, modified alkyds and plasticizers. Used for filling and levelling wood surfaces where transparency is required. It has a very good body resistant to over – spraying and wetting well the structure of the wood.
Keep material in a cool place below 250C. Keep the container tightly closed.
Shelf life of 12 months minimum.
NC SANDING SEALER CLEAR #021 does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. The mixture, in its liquid state is flammable and harmful if swallowed. If contact with eyes occurs, cleanse with fresh water and seek immediate medical advice.
NC SANDING SEALER CLEAR #021 is best for furniture in general, chairs, turned pieces and related products.
Appearance: Light yellow, opalescent
Sp. gravity: 1.0 +/- 0.2
Flash point: 00C
Solids (w): 40%
Solids (v): 30%
Viscosity: 120 – 200 poise
Coverage: 7 – 8 m2/L
Dilution: 50 – 100%
Thinner: NC Thinner 115/215
Drying time:
Touch dry: 10 – 15 min.
Hard dry: 4 hours
Sandable: 20 – 25 min.
Apply the desired dyed, stains (optional) • Spray NC Sanding Sealer Clear #021 cross – sectionally into the surface 1 – 2 coats. • Sand it properly by manual or automatic sanding machine using 180 – 200 grit sand paper.To fill deep grains, use wood putty filler (refer to technical data for color range.) • Repeat the same process prior to topcoating.
