Water based wood paints
HYDROWAX
HYDROWAX is a water-based wax, which enhances gloss finishes and impart water resistant and stain resistant properties. It is made from anionically stabilized, acqeous dispersion of various waxes and additives, taking the best characteristics of each to make a superior quality liquid wax.
Request the TDS via
info@mas-paints.comor by filling out the form below.
info@mas-paints.comor by filling out the form below.
HYDROWAX can be applied to almost any surface where a gloss finish is required and is particularly suitable as a finish coat for all MAS Stucco Venetian plasters. Hydrowax is a waterproof and user friendly with high performance that provides ultimate protection, while its liquid state allows the addition of colored pigment paste, metallic powders and other compatible fine art materials with ease.
Appearance: Liquid paste
Colour: Opaque
Specific Gravity: 1.0 kg/L
Flash point: 100ºC
Solid content (w): 20%
Coverage: 8 – 25 m2/L depending on the porosity of the surface
Dilution: Ready to use
Shelf life: 12 months
Drying time:
Touch Dry: 1-3 hours
Buff: 12 hours
Colour: Opaque
Specific Gravity: 1.0 kg/L
Flash point: 100ºC
Solid content (w): 20%
Coverage: 8 – 25 m2/L depending on the porosity of the surface
Dilution: Ready to use
Shelf life: 12 months
Drying time:
Touch Dry: 1-3 hours
Buff: 12 hours
HYDROWAX does not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. The mixture, in its liquid state is flammable and harmful if swallowed. If contact with eyes occurs, cleanse with fresh water and seek immediate medical advice.
Ensure that the polished plaster has been allowed to dry for 24 hours minimum. HYDROWAX should be applied with a sponge, rag or spatula/wide putty knife in thin, even coats over an entire surface. It should be allowed to dry up to 12 hours before being buffed to a high sheen using a clean rag or mechanical buffer. As Hydrowax may become too thin to apply properly in hot weather, it may be chilled for a short time for more optimal application. Hydrowax is ready to use, touch dry in 1-3 hours.
Buff with a mechanical buffer to enhace the surface shine.
Keep material in a cool place below 250C. Keep the container tightly closed. Shelf life of 12 months minimum.
Buff with a mechanical buffer to enhace the surface shine.
Keep material in a cool place below 250C. Keep the container tightly closed. Shelf life of 12 months minimum.
