Home » Emulsion Products » Masgum
Pail-Mas-Paints

General & Speciality products

masgum

MASGUM is a waterproofing product based on elastomeric acrylic resins and additives dispersed in water. It contains special anti-fungal biocides suitable for exterior surfaces and infrequent damped areas.
After setting, the product offers good waterproofing and weatherproofing properties.
Request the TDS via
info@mas-paints.comor by filling out the form below.
Waterproofing of flat roofs, terraces, balconies, expansion joints, cracks caused by periodic movements of foundations and for minor repair.

Appearance – Liquid pigmented

Colour – White, Grey, Red, Black

Gloss – Matt

Specific Gravity – 1.40kg/L

Solid Content – 61% by weight

Coverage – 4 – 5 m2/L

DFT – 100 microns

Ultimate Elongation – 600%

Tensile Strength – 17kg/m2

Water Vapour permeability (DIN 52615) – < 5000 microns

Resistance to wear and tear – Excellent

Resistance to Ageing – Excellent

Resistance to Atmospheric Agent – Excellent

Substrate must be free from any form of contaminants.  Remove all blistered, cracked and peeled off paint from the surface if there are any.

Prevent freezing of the product, it should be stored at a temperature not lower than 50C.  Carefully stir the product before use.  Remove all traces of friable elements, oil, grease, plaster spots, etc., from the surfaces to be treated.  Apply the prime coat diluted with 50% of water.  

For the following coats, use the products in its original density or diluted with a little of water and make sure that the layer has completely dried up.  The treatment will require at least 2 kg/m2 of MASGUM in a 3 coats system.  In the case of particularly porous or hut surfaces, it is necessary to we the surface before starting the treatment.

Recommended Thinner – Sweet Water
Volume of Thinner – Approx. 0 – 10%
Nozzle pressure – 140 – 190 kg/m2
Nozzle Orifice – 0.021 – 0.027 in.

Roller
Recommended Thinner – Sweet Water
Volume of Thinner – Approx. 0 – 50%
Cleaning – Water

 

brush-product