General & Speciality products
acritop
ACRITOP is a special acrylic-based, fast-drying topcoat developed to give a hard film, good colour retention and resistance to water and to extreme climatic condition.
Colours – Clear and Pigmented
Gloss – Gloss/Matt
Specific Gravity – 0.900 – 1.25
Flash Point – 40ºC
% Solid Content – 35-45 approx.
Dft. – 30 microns
Coverage – 8 – 12 m2/L
Method of Application – Roller, Spray
Mixing Ratio – Single Pack
Thinner – Thinner #255
Conventional Spray
Nozzle orifice – 2–3 mm.
Nozzle Pressure – 43–57 psi.
Dilution – 5–15 %
Thinner – #255
Airless
Nozzle orifice – 0.38 – 0.46 mm.
Nozzle Pressure – 1138 – 2100 psi.
Dilution – 0–5 %
Thinner – #255
The surface must be clean, dry, and free from dirt, oil, grease and other foreign matters. If detergent is used for cleaning, rinse with fresh water.
The temperature of the substrate should be min 50C above the dew point. Avoid painting in direct sunlight.
Drying Time:
Dry touch @ 25ºC – 1 hour
Hard dry @ 25ºC – 24 hours
To recoat @ 25ºC – 3 – 4 hours
Recommended System:
Interior
MASTEX (rolled/flattened) – 1 coat
ACRITOP – 2 coats
Exterior
DURATEX (rolled/flattened) – 1 coat
ACRITOP – 2 coats
